Mobile Pumping Station from Prevac

Prevac’s mobile pumping station (MPS) can be built of different vacuum equipment, such as forevacuum, turbomolecular pumps, and many types of mass spectrometers. A microprocessor control unit PCU16 controls the unit’s operation and supports an ultra-high vacuum pump, fore vacuum pump, electromagnetic safety valve, electromagnetic vent valve, and two vacuum gauges based on the 0..10V output standard.

The PCU16 shows the state of all the connected peripheral devices on a 6.5” TFT LCD touchscreen, offering clear readouts of key system parameters to the user. This combination of easy and user-friendly interface enables full automatic pumping and venting along with complete protection of all integrated components.

Key Features

The main features of the mobile pumping station are:

  • Combines different vacuum equipment
  • Operation is fully controlled by microprocessor control unit PCU16
  • Full device control
  • Remote access to device
  • Real time data acquisition
  • Fast, real time chart data preview


The specifications of the mobile pumping station are:

  • Forevacuum pumping speed: 14m3/h
  • Turbo pumping speed: 270 l/s
  • Flange connection: DN 63 CF
  • Ultimate pressure: <1x10-10 mbar
  • Separate fore and high vacuum pressure measurement
  • Equipped with mass spectrometer: range 0 - 200 amu
  • Cooling method: air
  • Available interfaces: RS232, Ethernet/IP
  • Integrated UPS
  • Compressed air and purge gas connection: hose OD 6mm

Ask A Question

Do you have a question you'd like to ask the manufacturer of this equipment or can you provide feedback regarding your use of this equipment?

Leave your feedback
Other Equipment by this Supplier
Other Equipment