MA-35 Motorized Precision Linear Actuator with Closed-Loop Motor from PI micos

MA-35 Motorized Precision Linear Actuator with Closed-Loop Motor from PI micos

The micro actuator MA-35 was developed for applications with limited space conditions or where high-precision actuators must be positioned decoupled of the drive. Compared to other pushers the standard force is very high (200 N) and can be increased.

The MA-35 actuators are motorized with DC gear-motor with encoder and 2-phase gear-motor combination or as direct drive DC with encoder or 2-phase stepper motor. The motorized drives can be integrated with a ground preloaded re-circulating ball screw with 1 mm or 2 mm pitch.

Based on high requirement pushing forces, high speed or high resolution can be achieved. The travel range is 52 mm (2"). Two integrated mechanical or optional hall limit switches prevent damage from accidental overtravel. All critical elements are made of stainless steel.

Key Features

The key features of the MA-35 are:

  • Travel range 52 mm (2")
  • Uni-directional repeatability down to 0.2 µm
  • Maximum speed 100 mm/sec
  • Force max. 500 N
  • Integrated hall / mechanical limit switches
  • High resolution
  1. nas nae nas nae Syria says:

    Dear sirs:
         Considering your product MA-35 I have some questions:
              - Is it possible to use it in a hexapod for vibration isolation in the range 0-500 Hz with amplitudes in mm.
              - what is the response of the motor.

    Thanks in advance.

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of
Ask A Question

Do you have a question you'd like to ask the manufacturer of this equipment or can you provide feedback regarding your use of this equipment?

Leave your feedback
Other Equipment by this Supplier