Open-type Single Rail Positioning Stage by H2W Technologies

H2W Technologies offers a compact and open-type positioning stage called SR stage. It is suitable for closed-loop positioning applications where high acceleration and high speed of lighter loads are required.

Since the stage has a low overall weight, it is suitable as a Y axis (top axis) in a multi-axis system. The lower moving mass of the SR positioning stage enables higher accelerations of light payloads.

The ironless core coil assembly of the stage does not have any magnetic attractive force to the stationary magnet assembly. This results in reduced load and improved life of the bearing system. The cable carrier is large enough to enable the passage of payload cables and hoses.

The SR positioning stage includes motors, bearings, encoders, cable carriers, limit switches, bellows and hard stops.

Key Features

The main features of the SR positioning stage are:

  • Low cost
  • Small footprint and cross section
  • Lowest weight per unit length
  • High speed
  • High acceleration of light loads.

Applications

The applications of the SR positioning stage are:

  • Clean room
  • Vision inspection
  • Parts transfer
  • Pick and place.
Ask A Question

Do you have a question you'd like to ask the manufacturer of this equipment or can you provide feedback regarding your use of this equipment?

Leave your feedback
Submit
Other Equipment by this Supplier
Other Equipment