Site Sponsors
  • Oxford Instruments Nanoanalysis - X-Max Large Area Analytical EDS SDD
  • Park Systems - Manufacturer of a complete range of AFM solutions
  • Strem Chemicals - Nanomaterials for R&D
Posted in | Microscopy

There is 1 related live offer.

5% Off SEM, TEM, FIB or Dual Beam

HRTEM Provides Atomic Scale Images of Changes in Magnesium due to Irradiation

Published on August 7, 2013 at 8:35 AM

A team of researchers led by North Carolina State University has developed a technique that provides real-time images of how magnesium changes at the atomic scale when exposed to radiation. The technique may give researchers new insights into how radiation weakens the integrity of radiation-tolerant materials, such as those used in space exploration and in nuclear energy technologies.

Researchers used an HRTEM to simultaneously irradiate the magnesium and collect images of the material at the atomic scale. Image: Weizong Xu.

“We used high-resolution transmission electron microscopy (HRTEM) to simultaneously irradiate the magnesium and collect images of the material at the atomic scale,” says Weizong Xu, a Ph.D. student at NC State and lead author of a paper describing the work. “It is a new way to use an existing technology, and it allowed us to see voids forming and expanding in the material.

“Prior to this, we knew radiation could cause voids that weaken the material, but we didn’t know how the voids formed,” Xu says. Voids are physical gaps in materials that begin at the atomic level and can cause a material to swell or crack. Click here to see HRTEM footage of a void expanding.

The researchers looked at magnesium for two reasons. First, magnesium’s atoms arrange themselves into tightly packed layers in a hexagonal structure.

“This is important, because many radiation-tolerant materials have the same structure – including zirconium, which is widely used in research on radiation-tolerant materials such as those used in nuclear power plants,” says Dr. Suveen Mathaudhu, a co-author of the paper and adjunct assistant professor of materials science and engineering at NC State under the U.S. Army Research Office’s Staff Research Program.

The second reason they chose magnesium is because it takes less energy to cause void formation in magnesium than in other materials with similar structures, such as zirconium. This lower energy threshold is what allowed researchers to use HRTEM to trigger void formation and capture atomic-scale images of the process with the same microscopy beam.

“You couldn’t use this technique on zirconium, for example,” Mathaudhu says. “But what we’re learning about void formation gives us insight into how radiation damages these kinds of materials.

“In addition to any energy applications, we need to develop new radiation-tolerant materials if we want to explore deep space,” Mathaudhu says. “This may move us one step closer to that goal.”

“If we can improve our understanding of the mechanisms behind void formation, we can begin developing materials to control the problem,” says Dr. Yuntian Zhu, a professor of materials science and engineering at NC State and senior author of the paper.

The paper, “In-situ atomic-scale observation of irradiation-induced void formation,” was published online Aug. 5 in Nature Communications. The paper was co-authored by Dr. Guangming Cheng, a former postdoctoral researcher at NC State; Dr. Weiwei Jian, a postdoctoral researcher at NC State; Dr. Carl Koch, Kobe Steel Distinguished Professor in the Department of Materials Science and Engineering at NC State; Dr. Yongfeng Zhang of Idaho National Laboratory; and Dr. Paul C. Millett of the University of Arkansas. The work was supported by the U.S. Army Research Office and Idaho National Laboratory.

Source: http://www.ncsu.edu/

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit