Site Sponsors
  • Park Systems - Manufacturer of a complete range of AFM solutions
  • Strem Chemicals - Nanomaterials for R&D
  • Oxford Instruments Nanoanalysis - X-Max Large Area Analytical EDS SDD

There is 1 related live offer.

Save 25% on magneTherm

New Report on Nanocomposites and Nanoporous Materials

Published on December 8, 2008 at 6:29 PM

Research and Markets has announced the addition of the "Nanocomposites and Nanoporous Materials VIII" report to their offering.

Selected, peer reviewed papers from the 8th International Symposium on Nanocomposites and Nanoporous Materials (ISNNM8), February 22-24, 2007, Jeju, Korea

The recent utilization of nano-sized powders and porous materials has led to the expectation that it will lead to basic breakthrough solutions for prospective nanomaterial products offering high performance and multi-functionalism. For this reason, many industrial countries have financially supported nanostructured materials development and their use in technical innovation.

This collection comprises 35 peer-reviewed papers. The strong international participation and the high quality of the presentations is a sure indication of the interest shown in the fields of nanocomposites, nano-catalysts, ultrafine polymers, nano-adsorption, nano-characterization etc., as they affect fundamental research and applied engineering.

A succinct up-to-date coverage of the subject.

Key Topics Covered:

  • Catalytic Combustion of Effluents from Methane-Based MCFC Device over Cordierite Supported Pd/La-Al2O3 Catalyst
  • Low-Temperature Fabrication of Polycrystalline Yttrium Aluminum Garnet Powder via a Mechanochemical Solid Reaction of Nanocrystalline Yttria with Transition Alumina
  • Formation of Hollow Zinc Oxide by Oxidation and Subsequent Thermal Treatment
  • Antifungal Effectiveness of Nanosilver Colloid against Rose Powdery Mildew in Greenhouses
  • Fabrication of Oriented TiO2-Based Nanotube Array Thin Films
  • Formation of Lanthanum Hydroxide and Oxide via Precipitation
  • Colloidal Crystal Templating of Two-Dimensional Ordered Macroporous SiCN Ceramics
  • Reflectometry Studies of Mesoporous Silica Thin Films
  • Conductive Property of Carbon-Nanotube Dispersed Nanocomposite Coatings for Steel
  • Preparation of Platinum-Ruthenium Nanoparticles on Graphite Nanofibers
  • Thermal Behaviors and Fracture Toughness of Polyurethane-Dispersed Difunctional Epoxy Resins
  • Influence of Multiwalled Carbon Nanotube on Rheological Behavior of Mesophase Pitches
  • Preparation and Characterization of AuNP/Al2O3 with Bimodal Nanoporous Structure
  • The Effect of Physicochemical Treatment on Pd Dispersion of Carbon-Supported Pd Catalysts
  • The Effect of Si/Al Ratio on Selective Catalytic Reduction of NOx with NH3 over Pt/Al-SBA-15
  • Effect of Ball-Milling Method on the Formation of ODS Fe-14Cr-2Al-1Si-0.3Ta-1Y2O3 Powders
  • Nano-Sized Yttria Dispersed Ferritic Stainless Steels for SOFC Interconnect Applications
  • Methane Storage on Surface Modified Activated Carbons
  • Nickel Decoration on Multi-Walled Carbon Nanotubes Using Multi-Step Impregnation Method
  • Preparation and Characterization of Electrospun Carbon Nanofibers with Na2CO3/H3PO4 Activation
  • Removal of Hexavalent Chromium on Chitosan-Deposited Activated Carbon
  • Oxidation of Sulfur Components in Diesel Fuel with Tert-Butyl Hydroperoxide Using Chromium Containing Catalysts
  • Development and Application of Irradiation Technology in HANARO
  • Synthesis of Cu(In0.75Al0.25)Se2 Thin Films from Binary Selenides Powder Compacted Targets by Sputtering and Selenization
  • A Passive Film Formed on Alloy 600 in High Temperature Aqueous Solution
  • Formation of Nano M2X Particles by a Tempering in High Cr Ferritic/Martensitic Steel
  • Effect of Vanadium on Development of Acicular Ferrite Microstructure in Low Carbon Steel
  • Nucleation of Intragranular Ferrite on B1-Type Non-Metallic Inclusions
  • Microstructure and Nano-Indentation Properties of Ion-Irradiated Fe-9wt%Cr Alloy
  • Synthesis and Characterization of NiFe2O4 Nanoparticles Synthesized by Levitational Gas Condensation (LGC)
  • Corrosion Behavior of Ceramic Dispersion Strengthened High-Cr Stainless Steel
  • Brazing of Ti Using a Zr-Based Amorphous Filler
  • The Effect of Ag Diffusion Barrier on the Microstructure of a Titanium Dissimilar Joining
  • Effect of Magnesium Addition on the Phase Transformation of a-Alumina Prepared from Route of Ammonium Aluminum Carbonate Hydroxide
  • Reduction Behavior of W and Cu Oxides Powder Mixture
  • Comparative Studies of Cellular Permeable Solids as Catalyst Supports

For more information visit http://www.researchandmarkets.com/research/689ec5/nanocomposites_and

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit