Mar 14 2007
Investigating the composition and behavior of microscale environments, including those within living cells, could become easier and more precise with nanoelectrodes being developed at the University of Illinois.
"The individual nanotube-based probes can be used for electrochemical and biochemical sensing," said Min-Feng Yu, a U. of I. professor of mechanical science and engineering, and a researcher at the university?s Beckman Institute. "The position of the nanoelectrodes can be controlled very accurately."
To fabricate the nanoelectrodes, Yu and graduate students Kyungsuk Yum, Jie Hu and Han Na Cho begin by attaching a strong, rigid, boron-nitride nanotube to a much larger, conductive probe. The nanotube will form the insulating core of the nanoelectrode.
The researchers then coat the nanotube with a thin film of gold about 10-50 nanometers thick (a nanometer is 1 billionth of a meter.) The gold layer is then coated with an insulating polymer coating about 10 nanometers thick. Lastly, the researchers use a focused ion beam to slice off the end of the nanotube, exposing a conducting ring of gold sandwiched between an insulating core and an insulating outer ring.
The process yields nanoelectrodes with a diameter of 100 nanometers, and a length of up to 30 microns.
Because the nanotube is attached to a much larger probe, the researchers can manipulate the nanotube like a needle. They can control precisely where the nanotube penetrates a cell, for example, and even pinpoint smaller cell structures, such as the nucleus or mitochondrion.
The researchers have demonstrated that their nanoelectrode can sense the chemical environment within a droplet 10 microns in diameter. Their next step is to show that the probe can penetrate the cellular membrane of a living cell, without damaging the cell.
http://www.uiuc.edu
14th March 2007