Posted in | News | Nanomaterials | Nanoanalysis

Reduced Oxygen Levels Don’t Affect Surface Properties of Complex Oxide Films During Fabrication

Better batteries, catalysts, electronic information storage and processing devices are among potential benefits of an unexpected discovery made by Oak Ridge National Laboratory scientists using samples isolated from the atmosphere.

Researchers at the Department of Energy lab learned that key surface properties of complex oxide films are unaffected by reduced levels of oxygen during fabrication — an unanticipated finding with possible implications for the design of functional complex oxides used in a variety of consumer products, said Zheng Gai, a member of DOE’s Center for Nanoscale Materials Sciences at ORNL.

The findings are detailed in a paper published in Nanoscale.

While the properties of the manganite material below the surface change as expected with the removal of oxygen, becoming an insulator rather than a metal, or conductor, researchers found that the sample showed remarkably stable electronic properties at the surface. Gai emphasized that the robustness of a surface matters because it is precisely the surface properties that determine, influence and affect the functionality of complex oxides in catalysis and batteries.

“With these materials being a promising alternative to silicon or graphene in electronic devices, the ever-decreasing size of such components makes their surface properties increasingly important to understand and control,” Gai said.

While this work provides a fundamental understanding of a material used and researched for catalysts, oxide electronics and batteries, Gai and lead author Paul Snijders noted that it’s difficult to speculate about possible impacts.

“I always say that in basic science we are discovering the alphabet,” said Snijders, a member of ORNL's Materials Science and Technology Division. “How these letters will be designed into a useful technological book is hard to predict.”

Making this discovery possible was the fact the authors did their experiment using scanning probe microscopy in a vacuum system with no exposure of the samples to the atmosphere. This contrasts with the conventional approach of growing a sample and then installing it in analysis equipment. During such a transfer, scientists expose the material to the water, nitrogen and carbon dioxide in the air.

By studying pristine samples, the ORNL team gained a surprising new understanding of the physics of the material surfaces — an understanding that is necessary to design new functional applications, Snijders said.

Other authors of the paper, titled “Persistent metal-insulator transition at the surface of an oxygen-deficient, epitaxial manganite film,” are Min Gao, Hangwen Guo, Guixin Cao, Wolter Siemons and Thomas Ward of ORNL, Hongjun Gao of the Chinese Academy of Sciences and Jian Shen of Fudan University, China. Min Gao and Snijders contributed equally to this work, which was funded by DOE’s Basic Energy Sciences. A portion of the research was conducted at the Center for Nanophase Materials Sciences. The paper is available at http://pubs.rsc.org/en/content/articlelanding/2013/nr/c3nr02343e.

CNMS is one of the five DOE Nanoscale Science Research Centers supported by the DOE Office of Science, premier national user facilities for interdisciplinary research at the nanoscale. Together the NSRCs comprise a suite of complementary facilities that provide researchers with state-of-the-art capabilities to fabricate, process, characterize and model nanoscale materials, and constitute the largest infrastructure investment of the National Nanotechnology Initiative. The NSRCs are located at DOE's Argonne, Brookhaven, Lawrence Berkeley, Oak Ridge, Sandia and Los Alamos national laboratories. For more information about the DOE NSRCs, please visit http://science.energy.gov/bes/suf/user-facilities/nanoscale-science-research-centers.

UT-Battelle manages ORNL for DOE's Office of Science. The Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, please visit http://science.energy.gov/.

Source: http://www.ornl.gov/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Oak Ridge National Laboratory. (2019, February 11). Reduced Oxygen Levels Don’t Affect Surface Properties of Complex Oxide Films During Fabrication. AZoNano. Retrieved on April 20, 2024 from https://www.azonano.com/news.aspx?newsID=28045.

  • MLA

    Oak Ridge National Laboratory. "Reduced Oxygen Levels Don’t Affect Surface Properties of Complex Oxide Films During Fabrication". AZoNano. 20 April 2024. <https://www.azonano.com/news.aspx?newsID=28045>.

  • Chicago

    Oak Ridge National Laboratory. "Reduced Oxygen Levels Don’t Affect Surface Properties of Complex Oxide Films During Fabrication". AZoNano. https://www.azonano.com/news.aspx?newsID=28045. (accessed April 20, 2024).

  • Harvard

    Oak Ridge National Laboratory. 2019. Reduced Oxygen Levels Don’t Affect Surface Properties of Complex Oxide Films During Fabrication. AZoNano, viewed 20 April 2024, https://www.azonano.com/news.aspx?newsID=28045.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.