A new height-encoded nano-template strategy could help overcome chromatic blur in compact VR optics, pointing toward lighter, thinner, and more scalable full-colour near-eye displays.
Study: Printable grayscale nano-template for full-colour organic light-emitting diode near-eye displays with 3D achromatic metalenses. Image Credit: AI-generated image / OpenAI
A recent study published in Nature Communications presents a scalable fabrication strategy for three-dimensional (3D) achromatic metalenses for full-color organic light-emitting diode (OLED) near-eye display applications. The researchers combine grayscale electron beam lithography with dry etching and nanoimprint lithography to create printable metalenses with precisely controlled nanoscale geometries. The work demonstrates a practical route toward lightweight, compact, and scalable meta-optical components for next-generation AR and virtual reality systems.
Overcoming Manufacturing Barriers in Achromatic Meta-Optics
Metasurfaces have emerged as a transformative platform for optical engineering, enabling precise control of light through arrays of nanoscale structures. Their ultrathin form factor makes them attractive alternatives to conventional lenses for applications such as imaging, holography, waveguides, and near-eye display systems.
However, chromatic aberration continues to limit their use in practical full-color imaging because different wavelengths focus at different positions. Researchers have developed various achromatic metalens designs to address challenges, including dispersion-engineered meta-atoms, multilayer architectures, and complex nanostructured geometries.
Although these approaches improve color correction, they often require high-aspect-ratio or intricate nanostructures, whereas multilayer and overlay approaches can require high-precision alignment during fabrication. This causes manufacturing complexity and hinders large-scale production. Two-photon lithography offers greater design flexibility but remains constrained by low throughput and limited resolution for visible-light applications.
The study aims to address these challenges by introducing a grayscale electron-beam lithography strategy that creates height-encoded meta-atoms with independently controlled dimensions, enabling efficient multiwavelength phase control and scalable fabrication of practical full-color achromatic metalenses.
Engineering Height-Encoded Nano-Templates and Metalens Designs
The researchers developed a scalable fabrication workflow combining grayscale electron-beam lithography (EBL), dry etching, and nanoimprint lithography to produce 3D achromatic metalenses. The process began by patterning a ZEP-520A electron-beam resist using grayscale EBL. These depth profiles were transferred into silicon through inductively coupled plasma dry etching, creating height-encoded nano-templates. By systematically optimizing exposure dose and etching conditions, the team achieved precise control over both the diameter and height of the resulting nanostructures.
This fabrication strategy enabled the creation of a comprehensive library of 3D meta-atoms with varying geometries. The proposed approach introduced height as an additional design parameter, significantly expanding the available phase-control space even on a low-index resin platform. To design the achromatic metalens, the researchers employed a library-based phase-matching framework.
Rigorous coupled-wave analysis (RCWA) simulations were used to calculate the phase and transmission responses of candidate meta-atoms at red (635 nm), green (532 nm), and blue (450 nm) wavelengths. The optimization algorithm selected structures that minimized phase errors across all three wavelengths while reproducing the target focusing profile. A usage-guided optimization step further reduced the design to the 20 most frequently selected geometries, simplifying fabrication while maintaining performance.
High-Performance Achromatic Focusing and Full-Color Imaging
The researchers used the optimized nano-template as a reusable platform for nanoimprint lithography to fabricate 3D achromatic metalenses. They deposited a UV-curable resin directly onto the template and laminated it with a flexible polyethylene terephthalate (PET) substrate. This approach eliminated the need for a separate soft mold, simplifying the replication process and increasing manufacturing efficiency. The resulting metalenses combined lightweight construction, mechanical flexibility, and compatibility with replication-based production techniques.
Optical characterization confirmed the effectiveness of the achromatic design. Measurements at 450, 532, and 635 nm showed that the metalens focused all three wavelengths onto nearly the same focal plane, within 7 µm of the designed focal plane at 1.8 mm. The experimentally measured focal spot sizes closely matched simulation results with deviations below 10%.
The metalens also delivered diffraction-limited performance across the visible spectrum. Strehl ratios reached 0.83, 0.86, and 0.85 at blue, green, and red wavelengths, respectively. All three values exceeded the accepted diffraction-limited threshold of 0.8. The device maintained an average effective numerical aperture of approximately 0.29, further confirming its optical quality.
The researchers imaged a 1951 USAF resolution target under individual RGB illumination and under mixed-color conditions. The metalens consistently resolved fine features and maintained image sharpness and uniform magnification. Images captured under cyan, magenta, and white light exhibited minimal color fringing or blurring. The device also achieved focusing efficiencies of 14.8%, 11.3%, and 12.3% at blue, green, and red wavelengths, respectively, indicating stable operation across the visible range.
The team integrated the 3D achromatic metalens into a prototype virtual reality imaging system. Using an OLED display as the image source and a CMOS sensor as the detector, they demonstrated full-color image formation within a compact near-eye configuration. The achromatic device generated full-color images with reduced chromatic blur at a fixed image plane.
Toward Scalable Full-Color Meta-Optical Systems
This study presents a scalable manufacturing strategy for high-performance achromatic metalenses. By introducing precise height control into meta-atom design, the researchers expanded the optical design space. This additional degree of freedom enabled efficient multiwavelength phase control while maintaining a fabrication process suitable for replication and potential large-scale production.
The work demonstrates how advances in nanofabrication can address key challenges that have limited the practical deployment of meta-optics. The use of reusable height-encoded nano-templates simplifies replication, reduces manufacturing complexity, and increases production throughput. In addition, the printable polymer-based metalenses fabricated on flexible PET substrates offer advantages in weight, cost, and scalability over conventional glass-based optical components.
The researchers demonstrated diffraction-limited RGB focusing and full-color virtual reality imaging in a proof-of-concept platform. These results highlight the strong performance of the metalens platform. Potential applications include VR and AR displays, wearable optics, and miniaturized imaging devices. This combination of performance and manufacturability could support future development of advanced meta-optical technologies.
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Source:
- Jeon, Y., Park, C., et al. (2026). Printable grayscale nano-template for full-colour organic light-emitting diode near-eye displays with 3D achromatic metalenses. Nature Communications. DOI: 10.1038/S41467-026-73940-1, https://www.nature.com/articles/s41467-026-73940-1