Cellulose Nanomaterials Improve Electrospun Membranes for More Sustainable Water Treatment

By Muhammad OsamaReviewed by Susha Cheriyedath, M.Sc.Sep 11 2026

A new review examines how renewable cellulose nanomaterials can alter the strength, wettability, and contaminant-removal functions of electrospun filters, while probing what still stands between promising laboratory results and practical water-treatment systems.

Paper: Electrospun membranes based on cellulose nanomaterials for advanced water treatment applications. AI-generated abstract conceptual image created using ChatGPT/OpenAI

More than 700 million people in developing countries and rural areas consume contaminated water because of limited access to safe drinking water, creating a need for accessible point-of-use treatment technologies. A recent review published in the journal npj Materials Sustainability explored the use of renewable cellulose nanomaterials in electrospun membranes for water treatment.

Researchers reviewed the development of electrospun cellulose nanomaterial membranes as a potentially more sustainable approach to water treatment, focusing on how nanocellulose can improve membrane performance. Using nanocellulose can improve mechanical strength and hydrophilicity, increase permeability, and reduce irreversible fouling in some membrane systems.

Transitioning to Sustainable Filtration Solutions

Traditional centralized water treatment systems can be prohibitively expensive in rural and developing regions, leaving many communities worldwide heavily reliant on untreated water sources. Point-of-use filtration offers one route to improving access to safe drinking water. Green chemistry principles favor lower waste generation, safer solvents, greater energy efficiency, and renewable feedstocks.

Cellulose, the most abundant natural polymer, is a renewable basis for membrane development. Cellulose nanomaterials retain key properties of cellulose, including biodegradability and biocompatibility, while offering nanoscale structures well-suited for filtration. Electrospinning uses high-voltage electric fields to produce interconnected, nonwoven micro- and nanofibrous networks with controllable fiber morphology and pore architecture.

Techniques for Fabricating Nanocellulose Membranes

Researchers examined production paths for developing cellulose nanomaterial-based filtration media, beginning with extraction from lignocellulosic biomass. Cellulose is first separated from hemicellulose and lignin, often using alkaline or acid pretreatments. Purified cellulose can then be converted into cellulose nanomaterials through biological, mechanical, or chemical methods, including enzymatic hydrolysis, high-pressure homogenization, and sulfuric acid hydrolysis.

The extracted nanomaterials can be incorporated into polymeric matrices through techniques such as surface coating, mixed-matrix fabrication, and interfacial polymerization. The review primarily focused on electrospinning, which produces porous, interconnected micro- and nanofibrous networks. This method allows control over fiber morphology by adjusting solution properties and operating parameters, including voltage and flow rate.

Solvent selection and solution rheology were also examined because they influence electrospinning behavior. Alternative systems, such as ionic liquids, have been investigated to reduce reliance on toxic or volatile conventional solvents, but their cost, viscosity, and energy required for recovery remain obstacles to industrial use.

The review described how the concentration and surface chemistry of cellulose nanomaterials affect the viscoelastic and shear-thinning properties of electrospinning solutions. Uniform dispersion within the polymer matrix is needed to balance flow resistance and elasticity during the continuous formation of nanofibers.

Improving Membrane Performance with Nanomaterials

Incorporating cellulose nanomaterials into electrospun membranes has improved several measured properties in laboratory studies. For example, polyvinyl alcohol membranes containing 5% (v/v) ramie cellulose nanocrystals exhibited an increase in tensile strength from 16.08 to 34.23 MPa. In PVDF-HFP membranes, 2 wt.% nanocrystalline cellulose increased tensile strength from 12.6 to 17.2 MPa. The review cautioned that higher tensile strength alone does not demonstrate resistance to hydraulic compaction during pressure-driven filtration, which requires pressure-specific mechanical validation.

The hydroxyl-rich surface of cellulose nanomaterials also increased membrane hydrophilicity and water permeability. For instance, adding 0.5 wt.% cellulose nanocrystals to polyethersulfone electrospun membranes increased water flux from 136 to 235 L m-2 h-1 while improving membrane wettability. Greater wettability can reduce interactions between the membrane surface and foulants, thereby helping reduce biological and chemical fouling. Surface functionalization can also broaden the filtration capabilities of these nanocomposites.

Across separate membrane designs, TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) mediated oxidation and conductive polymers were used for adsorption or electrochemical disinfection. Under low-voltage electrochemical stimulation, PAN@PANI/CNC membranes achieved a 7-log reduction in bacterial counts in tests with E. coli and B. subtilis. Other functionalized nanofibrous membranes also adsorbed heavy metal ions, such as lead and chromium, and removed emulsified oils, crystal violet dye, and inorganic nanoparticles from aqueous systems.

Applications in Water Treatment

Electrospun nanocomposite membranes have been studied in various treatment processes, including microfiltration, ultrafiltration, nanofiltration, and membrane distillation. Their interconnected pore structures and low transmembrane pressure requirements may support decentralized, energy-efficient point-of-use filtration. For high-pressure nanofiltration and reverse osmosis applications, the review called for pressure-specific mechanical validation rather than extrapolation from low-pressure tests.

The surface chemistry of cellulose nanomaterials can also be modified for specific remediation tasks, such as separating oil-water emulsions and removing organic dyes. Researchers can adjust membrane composition and surface chemistry for different water and wastewater contaminants.

Pathways to Sustainable Industrial Production

Electrospun membranes reinforced with cellulose nanomaterials combine renewable feedstocks with filtration and functions such as antimicrobial activity and contaminant adsorption. Some designs combine physical separation with adsorption or electrochemical disinfection within a single membrane, allowing a single material to employ multiple contaminant-removal mechanisms. Renewable cellulose alone does not make these systems fully sustainable. Many reported membranes still use petroleum-derived polymers such as PAN, PVDF, or PES, and solvent recovery or membrane regeneration can carry substantial energy and chemical costs.

Future work should focus on larger-scale manufacturing and environmental performance. Key areas include developing fully bio-based polymer matrices, testing safer solvent systems with practical recovery methods, and refining manufacturing processes to cut energy, water, and chemical use. Pilot-scale testing under realistic operating conditions, standardized reporting, life-cycle assessment, and techno-economic analysis will be needed to judge long-term performance, operating costs, and commercial feasibility.

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.