Pyrex-Nitride Probe – Diving Board Cantilevers from Nanoworld

The Pyrex-Nitride probes have silicon nitride cantilevers with very low force constants and integrated oxide sharpened, pyramidal tips with a height of 3.5 µm. The tip is located 4µm behind the free end of the cantilever. This probe series features a support chip that is made of Pyrex.

Two chip versions are available:

  • The DB series with rectangular / diving board cantilevers
  • The TR series having triangular cantilevers.

Both sides of the chip have identical cantilevers. All cantilevers are stress compensated and have a 70 nm chromium / gold backside coating for high laser reflectance.

All chips are pre-separated prior to shipment and come in Gel-Pak containers. The typical tip radius of curvature of is below 10 nm. The cantilever bending is below 2°.

For more information contactwww.nanworld.com

Other Equipment by this Supplier