Welding uses heat to join pieces of metal in everything from circuits to skyscrapers.
But Rice University researchers
have found a way to beat the heat on the nanoscale.
Jun Lou, an assistant professor in mechanical engineering and materials science,
and his group have discovered that gold wires between three-billionths and 10-billionths
of a meter wide weld themselves together quite nicely – without heat.
They report in today's online edition of the journal Nature Nanotechnology
that clean gold nanowires with identical atomic structures will merge into a
single wire that loses none of its electrical and mechanical properties. The
process works just as well with silver nanowires, which bond with each other
or with gold.
This cold-welding process has been observed on the macro scale for decades,
Lou said. Clean, flat pieces of similar metals can be made to bond under high
pressure and in a vacuum. But only Lou and his colleagues have seen the process
happen on the nanoscale, under an electron microscope.
As so often happens in basic research, that's not what they were looking for
at all. Lou and Rice graduate student Yang Lu, with collaborators at Sandia
National Laboratories and Brown University, were trying to determine the tensile
strength of gold nanowires by attaching one end of a wire to a probe in a transmission
electron microscope (TEM) and the other to a tiny cantilever spring called an
atomic force microscopy (AFM) probe.
Pulling the wire apart gave the team a measurement of its strength. What they
didn't expect to see was the broken wire mending itself when its ends or sides
touched. Measurements showed the reconnected wire was as strong as before.
"Before you can actually stretch something, you need to clamp it well,"
said Lou, who received a Young Investigators Research Program grant from the
Air Force Office of Sponsored Research last year. "During the manipulation
process, we observed this type of welding behavior all the time.
"Initially, we didn't pay attention to it because it didn't seem significant.
But after doing a little research on the field, I realized we discovered something
that may be useful."
In testing, Lou found the nanowires could be snapped and welded many times.
Mended wires never broke again at the same spot; this attests to the strength
of the new bond.
The wire's electrical properties also seemed unaffected by repeated breaking
and welding. "We'd break a wire and reweld it 11 times and check the electrical
properties every time. All the numbers were very close," he said.
The keys to a successful weld are the nanowire's single crystalline structure
and matching orientation. "There are a lot of surface atoms, very active,
that participate in the diffusion at the nanoscale," Lou said. "We
tried gold and silver, and they weld in the same way as long as you satisfy
the crystalline-orientation requirement."
Lou sees the discovery opening new paths for researchers looking at molecular-scale
electronics. He said teams at Harvard and Northwestern are working on ways to
pattern arrays of nanowires, and incorporating cold welding could simplify their
processes. "If you're building high-density electronic devices, these kinds
of phenomena will be very useful," he said, noting that heat-induced welds
on the nanoscale run the risk of damaging the materials' strength or conductivity.
Lou said the discovery has caused a stir among the few he's told. "Different
people see different aspects: Electrical engineers see the application side.
Theory people see some interesting physics behind this behavior. We hope this
paper will encourage more fundamental study."
The paper's co-authors include Jian Yu Huang, a scientist at the Center for
Integrated Nanotechnologies at Sandia National Laboratories; and Professor Shouheng
Sun and former graduate student Chao Wang of Brown University.
The National Science Foundation and the Air Force Office of Sponsored Research
supported the project.