Nanotechnology News

RSS

Kyocera Introduces Nano-Silver Technology-Based Lead-Free, Pressureless Sinter Paste

Kyocera America, Inc., Chemical Sales Division, today announced the U.S. introduction of its environmentally-friendly XT2773R7 Silver Sinter Paste, a proprietary formulation specifically developed to deliver a wider range of benefits and performance characteristics compared to high-lead solders.

19 May 2015

X-FAB Partners with Exagan to Industrialize Technology for GaN-on-Silicon Devices on 200mm Wafers

X-FAB Silicon Foundries and Exagan, a start-up innovator of Gallium Nitride (GaN) semiconductor technology that enables smaller and more efficient electrical converters, have entered into a joint development agreement to industrialize Exagan’s GaN-on-silicon technology, begin producing high-speed power switching devices on 200mm wafers and establish a European production center where the two partner companies will manufacture GaN devices for the solar, industrial, automotive, IT electronics and other markets.

19 May 2015

Plasmons Influence Carbon-Based Nanoparticles for Sensitizing Cancerous Tumors

Radiotherapy used in cancer treatment is a promising treatment method, albeit rather indiscriminate. Indeed, it affects neighbouring healthy tissues and tumours alike. Researchers have thus been exploring the possibilities of using various radio-sensitizers; these nanoscale entities focus the destructive effects of radiotherapy more specifically on tumour cells.

19 May 2015

New Report on Nanomaterials and Graphene for 3D Printing and Additive Manufacturing

Research and Markets has announced the addition of the "Nanomaterials and Graphene for 3D Printing and Additive Manufacturing" report to their offering.

19 May 2015

NPL Representatives Take Part in Graphene International Co-operation Exchange

Representatives from the National Physical Laboratory (NPL) attended the Graphene International Co-operation Exchange held in Fengtai Park, Beijing, China, on 21 April 2015.

19 May 2015

CAP-XX Introduces Thinline Supercapacitors with Unique Nanotechnology Construction

CAP-XX, developer of flat supercapacitors for burst and back-up power in space-constrained electronic devices, today launched its Thinline series of single-cell supercapacitors. The world's thinnest at 0.6mm thick, and with prices starting at less than US$1 in large volumes, Thinline was developed to address the size, weight and cost challenges of designing thin, sometimes disposable electronic devices for the Internet of Things (IoT).

19 May 2015

A Nontoxic Nanocarrier for Targeted Delivery of Analogs to Cancer Cells

Researchers at Oregon State University are pursuing a new concept in treatment of epithelial cancer, especially head and neck cancer, by using two promising "analogs" of an old compound that was once studied as a potent anti-tumor agent, but long ago abandoned because it was too toxic.

19 May 2015

Novel Microfluidic Chip Can Capture Rare Clusters of Circulating Tumor Cells

Researchers have developed a microfluidic chip that can capture rare clusters of circulating tumor cells, which could yield important new insights into how cancer spreads. The work was funded by the National Institute of Biomedical Imaging and Bioengineering (NIBIB), part of the National Institutes of Health.

19 May 2015

DELMIC Announces Workshop Hosted by Phenom World on Integrated CLEM to be Held on Wednesday June 24th at the Francis Crick Institute (Lincoln Inn Fields Laboratory)

DELMIC develops and manufactures products which are focused on high performance, user friendly, integrated microscopy solutions. Working together with Phenom World, the companies have developed the Delphi microscope, the all-in-one solution for Correlative Light and scanning Electron Microscopy.

From Delmic B.V. 19 May 2015

Laser Technique for Low-Cost Self-Assembly of Nanostructures

Researchers from Swinburne University of Technology and the University of Science and Technology of China have developed a low-cost technique that holds promise for a range of scientific and technological applications.

19 May 2015

European Researchers Create Tunable Microwave Antennae Using Graphene Supplied by Graphenea

Graphene antennae in the microwave part of the spectrum can be tuned by an applied voltage. This is the latest result, published in the renown physics journal Applied Physics Letters, by a pan-European collaboration between Romania, Greece, Italy, and Ireland, using Graphenea graphene.

From Graphenea 18 May 2015

Researchers Fabricate Electrically Conductive Nanocomposite Laminate with Less Graphene Loading

Researchers at the Department of Energy’s Oak Ridge National Laboratory (ORNL) have developed a new method for commercial-scale fabrication of graphene. This could lead to significant advances in flexible electronics, and could possibly change the manner in which graphene is viewed and utilized.

18 May 2015

Novel CLAIRE Technique for Nanoscale Imaging of Soft Matter

Researchers at the Lawrence Berkeley National Laboratory have discovered a new cathodoluminescence activated imaging by resonant energy transfer (CLAIRE) technique that extends high electron microscopy resolution to the dynamic imaging of soft matter.

From Lawrence Berkeley National Laboratory 18 May 2015

ARM and UMC Offer Artisan Physical IP Solution on 55nm

ARM and United Microelectronics Corporation ("UMC"), a leading global semiconductor foundry, today announced the availability of a new ARM® Artisan® physical IP solution on 55nm to accelerate the development of ARM processor-based embedded systems and Internet of Things (IoT) applications.

18 May 2015

New Porous, Layered Material That Can Serve as a Graphene Analog

The Science
An electrically conductive material, with layers resembling graphene (single sheet of graphite), was synthesized under mild conditions using a well-known molecule that allows good electronic coupling of nickel ions and organic moieties. The new porous material exhibits high electrical conductivity as a bulk material that is potentially tunable and has unusual temperature dependence, suggesting new fundamental physics.

18 May 2015

Nanotechnology News

Kyocera Introduces Nano-Silver Technology-Based Lead-Free, Pressureless Sinter Paste

X-FAB Partners with Exagan to Industrialize Technology for GaN-on-Silicon Devices on 200mm Wafers

Plasmons Influence Carbon-Based Nanoparticles for Sensitizing Cancerous Tumors

New Report on Nanomaterials and Graphene for 3D Printing and Additive Manufacturing

NPL Representatives Take Part in Graphene International Co-operation Exchange

CAP-XX Introduces Thinline Supercapacitors with Unique Nanotechnology Construction

A Nontoxic Nanocarrier for Targeted Delivery of Analogs to Cancer Cells

Novel Microfluidic Chip Can Capture Rare Clusters of Circulating Tumor Cells

DELMIC Announces Workshop Hosted by Phenom World on Integrated CLEM to be Held on Wednesday June 24th at the Francis Crick Institute (Lincoln Inn Fields Laboratory)

Laser Technique for Low-Cost Self-Assembly of Nanostructures

European Researchers Create Tunable Microwave Antennae Using Graphene Supplied by Graphenea

Researchers Fabricate Electrically Conductive Nanocomposite Laminate with Less Graphene Loading

Novel CLAIRE Technique for Nanoscale Imaging of Soft Matter

ARM and UMC Offer Artisan Physical IP Solution on 55nm

New Porous, Layered Material That Can Serve as a Graphene Analog

News Categories

First Look into the Electrostatic Landscape of a Moiré Unit Cell

New Therapy Uses Tumor Chemistry to Trigger Cancer Cell Death

Optofluidic 3D Micro/Nanofabrication for Diverse Materials and Multifunctional Microdevices

Nanostructured Plasma Engineering Extends the Life of Industrial Steel

Turning Methane into Carbon Nanotubes and Hydrogen

Enhancing Lipid Nanoparticle Stability for Faster Pharmaceutical Development

Turning Almond Shells into Electronics: A Conversation on Laser-Induced Graphene

Enhancing Slurry Stability in Lithium-Ion Batteries with Turbiscan Technology

Featured Articles

Nanomedicine in 2026: Experts Predict the Year Ahead

Policy, Safety, and Regulation in the Age of Nanotechnology

Additive Nanomanufacturing: What is it and How Does it Work?

Sponsored Content

Particle Size Distribution Analysis for Reliable Inkjet Ink Manufacturing

Measuring MEMS Micromirror Dynamics with 4D Digital Holographic Microscopy

Automating Zeta Potential Measurements for Liposomes in High and Low Salt Environments

The Advantages of Dynamic Light Scattering in Nanoparticle Research